maiofam.blogg.se - Smart phone flash tool get brom

Error 2005: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005) Error 2004: BROM ERROR: S_FT_DOWNLOAD_FAIL (2004) Error 4008: BROM ERROR: S_FT_DOWNLOAD_FAIL (4008) Error 1040: S_UNSUPPORTED_OPERATION (1040) Error 1013: BROM ERROR: S_COM_PORT_OPEN Fail (1013) Error 1012: BROM ERROR: S_NOT_ENOUGH_MEMORY (1012)

Error: Please select one ROM at least before execution Please check the scatter file name you load is legal

The device automatically disconnects during flashing SP Flash Tool Failed to enumerate COM Port

Common SP Flash Tool Error Codes and Their Solutions.

After that click on the Start Play button and connect the phone to your computer.

(Ex: Begin address 0x2d88000 and Format Length 0x100000).

Copy the “Begin address” and “format Length” and paste in the manual option.

Open the file named scatter in the firmware folder and search for FRP by pressing control + F.

After that click on manual format flash.

Open the sp flash tool and select the scatter file from the given flash file.

Follow these steps given below to unlock FRP only. If your phone has FRP lock and wants to remove FRP lock without flash then you can unlock it with the help of this file. If your phone is in dead mode, logo hangs, or the phone is locked, after flashing from this file all the problems will be fixed simultaneously and if you are locked with FRP then flashing will unlock it. Note: During flashing, do not remove the data cable from the phone, otherwise the phone can go into a dead mode.

The option of the green tick will come after flashing is complete.

According to the boot mood of the phone, press the button and connect the data cable with the phone.

Then switch off the phone to connect the phone to Flashtool.

After that click on choose in the scatter-loading file tab and select the scatter file from the flash file folder.

And select the MTK_AllInOne_DA.bin file from the FlashTool folder.

After that open, the tool, click on choose in the download agent tab.

Open the FlashTool folder and run flashtool.exe.

SP Flash Tool Download and Install MediaTek Driver, Charge the phone 30% before flashing.